BRIDGES Miniaturised Acoustic Smart Sensor

Development of a miniaturised acoustic smart sensor falls under BRIDGES WP5, Task 5.4 lead by NOC. The deliverable will be the design and build of a suitable system with accompanying documentation to support system integration into the glider being designed under the BRIDGES project.

This task will integrate a sensor payload targeted to support surveillance of sea-bed mining activities to monitor the impact of discharges of the unwanted debris and to determine nodule characteristics and associated substrate. We require an acoustic specialist to design and build a miniaturised acoustic sensor suitable for installation on the D and UD vehicles (to 5000m depth).

This low-power, low-range sensor will be used for purely scientific purposes to characterise sea-bed sediment properties. The miniaturized acoustic smart sensor will be designed to obtain information on sea bottom sub-surface layers.

The sensing package will consist of: a set of transducers and hydrophones for acoustic transmission and reception in the frequency range of 10-30 KHz; a programmable wideband signal generator; a low power and low noise acquisition system and a set of processing algorithms to extract the different acoustic impedances and sound speed profiles of the sea-bottom layers with a penetration up to 10 meters. Technical requirements to allow integration with the BRIDGES glider are given below: Maximum power consumption during sampling: 25W Total sampling time at bottom of dive no more than: 1 minute @ 25W Power should be kept to a minimum to maximise deployment time.

Discrete operation enabled/disabled by external input Communications: Ethernet TCP/IP and/or RS232 Optional PPS TTL signal from glider control for time synchronization Externally supplied power, max supply voltage: 48V Data storage on board (approx. 500 Gb) Comprehensive technical documentation (including manuals, schematics, data sheets, interface protocols and other as required) Physical size and weight to be suitable for Glider operations. It is expected that the glider will have a total maximum wet payload weight of approx. 5Kg .

Maximum Operating depth : 5000m Additional information: I would like to notify you that this procurement opportunity is currently live on Tenders Electronic Daily, a copy of the Notice is attached and, if you have not already taken the opportunity to register, instructions are detailed below on the process for registration and expression of interest via Crown Commercial Service’s e-Sourcing Suite. This procurement will be managed electronically via the Crown Commercial Service’s e-Sourcing Suite.

To participate in this procurement, participants must first be registered on the e-Sourcing Suite. If Bidders have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link ‘Register for CCS eSourcing’.

Full instructions for registration and use of the system can be found at http://ccs.cabinetoffice.gov.uk/i-am-supplier/respond-tender Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. Your email must clearly state: the name and reference for the procurement you wish to register for; the name of the registered supplier; the name and contact details for the registered individual sending the email.

Crown Commercial Service (CCS) will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite. The registered user will receive a notification email to alert them once this has been done.

As a user of the e-Sourcing Suite you will have access to Emptoris email messaging service which facilitates all messages sent to you and from you in relation to any specific RFX event. Please note it is your responsibility to access these emails on a regular basis to ensure you have sight of all relevant information. For technical assistance on use of the e-Sourcing Suite please contact Crown Commercial Service (CCS) Helpdesk : Freephone: 0345 010 3503 email: supplier@ccs.gsi.gov.uk Training support to respond to a requirement is available to bidders at http://www.uksbs.co.uk/services/procure/Pages/supplier.aspx