Mechanical & Public Health Framework (MPHF) (2026-30)
University of StrathclydeEstimated Value
Up to £2,977,120
Deadline
Not specified
Published
15 April 2026
Type
works
Overview
This Prior Information Notice (PIN) relates to a project to establish a Mechanical & Public Health Framework (MPHF) (2026-30) (UOS-42409-2026) at the University of Strathclyde.
Key points
- specialist gas systems: design, supply, installation, & commissioning of laboratory gas systems, including oxygen (O₂), nitrogen (N₂), carbon dioxide (CO₂), hydrogen (H₂), argon (Ar), and other specialist/research gases / cylinder manifold systems & bulk gas storage / pressure regulation, changeover systems, & safety devices / medical & healthcare teaching gas systems (where applicable):
- compressed air systems: supply, installation & upgrade of compressed air systems / supply, installation & maintenance of compressors, dryers, receivers, & filtration systems / distribution pipework & outlets / oil-free & medical-grade compressed air systems:
- distribution infrastructure: internal pipework systems (copper, stainless steel, or specialist materials) / lab bench connections & service outlets / zoning, isolation, & emergency shut-off systems:
- controls, monitoring & safety: alarm systems & leak detection / integration with Building Management Systems (BMS) where applicable / compliance with relevant safety standards & pressure system regulations; and
- testing, commissioning & maintenance: pressure testing, purging, & certification of systems / planned preventative maintenance (PPM) & reactive works / system validation and performance testing. Additional information: Please note, the lot structure is still to be confirmed, and is therefore subject to change.
Key points
- domestic water services: installation, refurbishment, & maintenance of hot and cold-water services pipework / system balancing & pressure management / dead leg removal & system optimisation:
- water storage tanks: inspection, installation, replacement, and refurbishment of cold-water storage tanks:
- Legionella compliance (L8 works): temperature control measures & required system modifications:
- above & below ground drainage: installation, refurbishment, & maintenance of above ground & below ground drainage systems; and
- thermal pipe insulation: installation & upgrade of insulation on domestic water pipework / compliance with energy efficiency & condensation control standards / identification and remediation of insulation defects. Additional information: Please note, the lot structure is still to be confirmed, and is therefore subject to change.
Key points
- ventilation systems: design, supply, installation, & commissioning of ventilation systems / general repairs & modifications to both supply & extract systems for teaching, office, & laboratory spaces / mechanical ventilation with heat recovery (MVHR) systems / upgrades to improve air quality and energy efficiency:
- ductwork systems: supply, installation & modification of ductwork systems / fire-rated & acoustic ductwork / air distribution systems & associated components:
- air handling & plant: supply & installation of air handling units (AHUs), fans, & associated plant / refurbishment & replacement of existing equipment / integration with existing systems & infrastructure:
- specialist ventilation (laboratories & critical spaces): supply, installation & modification of local exhaust ventilation (LEV) systems / supply & installation of ventilation for cleanrooms, workshops, and high-risk environments; and
- associated works: controls integration with Building Management Systems (BMS) / builders’ work and penetrations / testing, commissioning, & validation (e.g. air balancing, LEV testing). Additional information: Please note, the lot structure is still to be confirmed, and is therefore subject to change.
Key points
- planned & preventative maintenance (PPM): routine servicing of fume cupboards (ducted and recirculating) / inspection of mechanical & electrical components / filter inspection & replacement (where applicable) / calibration of airflow monitors & alarms:
- statutory testing & inspection: thorough examination & testing of LEV systems / airflow measurement & containment testing / compliance with COSHH regulations & guidance from the Health & Safety Executive (HSE) / certification & reporting:
- reactive maintenance & repairs: fault diagnosis & repair of fume cupboards & associated systems / replacement of fans, dampers, controls, & sash mechanisms / emergency call-out services:
- system upgrades & refurbishments: refurbishment or upgrade of existing fume cupboards / energy efficiency improvements (e.g. variable air volume systems) / integration with Building Management Systems (BMS); and
- associated LEV systems: maintenance & testing of ductwork, fans, and extract systems / laboratory extract systems & specialist containment equipment. Additional information: Please note, the lot structure is still to be confirmed, and is therefore subject to change.
Key points
- heating systems: low temperature hot water (LTHW) & medium temperature (MTHW) systems / gas fired boilers & connections to district heating networks / energy-efficient upgrades & decarbonisation projects:
- chilled water systems: pipework distribution & terminal units e.g. FCUs (Fan Coil Units), AHUs (Air Handling Units) / cooling for IT rooms, laboratories & critical infrastructure:
- natural gas installations: incoming gas services / internal distribution systems / gas boiler servicing & repairs / safety systems & compliance upgrades:
- ventilation & ductwork systems: general ventilation & mechanical extract systems / specialist systems for laboratories (e.g. fume cupboards) / air handling units & associated ductwork; and
- thermal insulation: pipework, ductwork, & plant insulation / compliance with energy efficiency & sustainability standards / identification & remediation of insulation defects. Additional information: Please note, the lot structure is still to be confirmed, and is therefore subject to change.
AI AnalysisMembers
Requirements, key tasks and tips for reading this tender — included with Tendarix membership.
£4.99/month after a 7-day free trial. Cancel anytime before it ends and you pay nothing.
Likely incumbents
Suppliers who won similar work from this buyer in the last 5 years.
- 1
Adman Int Ltd
1 contract wonlatest 1 Oct 2025£7m
total awarded
- 2
Ventro Ltd
1 contract wonlatest 1 Oct 2025£7m
total awarded
- 3
Taylor and Fraser Ltd
1 contract wonlatest 1 Oct 2025£7m
total awarded
- 4
Clark Contracts Ltd
1 contract wonlatest 1 Oct 2025£7m
total awarded
- 5
MPMH Construction Ltd
1 contract wonlatest 1 Oct 2025£7m
total awarded
Adman Int Ltd is the most likely incumbent based on recency and category match. To win, bidders typically need a clearly differentiated proposition or a price advantage.
Before you bid, buyers check
two years of filed accountsyour financial standingturnover vs contract valueyour Companies House recordcash flow for 30-day termscredit scores and ratios
Actions
Start free trialto open noticeCreate an account and start a 7-day free trial to open the buyer’s own notice and tender documents, plus fit scoring and the Bid Writer. Then £4.99/month — cancel anytime.
Open Bid WriterIndependent software, web & cloud studio. We design, build and grow digital products that quietly outlast their category.
How to Apply
Step-by-step submission guide
Submission Portal
Find a Tender
Open the original notice
Click the button below to view the full notice on Find a Tender Service (FTS)
Check the procedure type
The "Procedure" section tells you if it's Open (one stage) or Restricted (SQ then ITT). This changes how you apply
Access the eSourcing portal
FTS notices link to the buyer's eSourcing platform — register there to access documents
Complete the Selection Questionnaire
Higher-value contracts often require an SQ first — this pre-qualifies you before the full bid stage
Submit electronically
Upload your completed response through the eSourcing platform before the closing date and time
FTS contracts are above UK procurement thresholds. Late submissions are strictly rejected — submit at least 24 hours before the deadline to avoid portal issues.
Buyer Profile
University of StrathclydeKey Dates
Published
15 April 2026
Submission deadline
Not specified
Notice type
planning
Source
find a tender
Related Tenders
4 John street, maryport - lintel replacement and rendering
Replacement of a rotten timber lintel with a new steel or concrete lintel for a property located within a conservation area. To include renewal of lime stucco render to the front e
Joinery contractors framework
NHS Lanarkshire is setting up a Joinery Contractors Framework to supply planned, routine, reactive and emergency joinery work across its hospitals and community sites. The contract is split into three lots based on work value and location, with one‑year emergency cover required.
Angus rural mobility hub - enabling infrastructure works
The project comprises the enabling infrastructure only required for a new Mobility Hub. We are seeking a Main/ Principal Contractor to carry out the enabling infrastructure works f
SPS-11030 replacement roofing on link corridors at HMP grampian
The Scottish Prison Service is hiring a contractor to replace the deteriorated metal roofing on the external link corridors at HMP Grampian, a prison in Scotland.