UK Atomic Energy Authority

UKAEA wishes to engage with Small to Medium Enterprises (SME), designers and manufacturers for the supply of a detritiation system for the Tritium Management System located in the

Fusion offers potential future energy abundance yet is at the same time highly challenging. In the context of a fusion future full of opportunity, but also complexity, UKAEA wishes

Goods Required: 600 metres of High Voltage DC Tri-axial Cable Purpose: To connect two 80kV/70A high-voltage DC power supplies to Positive Ion Neutral Injectors (PINIs) used for pla

The United Kingdom Atomic Energy Authority (UKAEA) are undertaking the JET Decommissioning and Repurposing (JDR) programme, a multi-year programme in which the Joint European Torus

100kN load cell reversible (tension/compression, so it has to be a Universal Test System) • Velocities of cross hair 0.1mm/min to 1 mm/min (typical range of usage) • Floor mounted

This tender is to find supplier for Monitoring of facility stack and workplace tritium discharges to comply with site permits

The United Kingdom Atomic Energy Authority requires the services of the Maintenance of High-Pressure Compressors and Breathing Equipment Systems. All the compressors, compressed ai

This Preliminary Market Engagement Notice (PMEN) is to identify available capabilities within the supply chain for the data annotation and object detection model training under cha

UKAEA requires a contractor to design, supply and install 5 Blast Air Coolers which are suitable for outdoor installation and will operate without limitation. The Contractor shall

The Fusion Opportunities in Skills, Training, Education and Research (FOSTER) programme is an ambitious national fusion skills programme delivered by UKAEA on behalf of the UK fusi

The Fusion Opportunities in Skills, Training, Education and Research (FOSTER) programme is an ambitious national fusion skills programme delivered by UKAEA on behalf of the UK fusi

This project aims to further the knowledge gained from the previous project on how to deliver CMC materials that work for the nuclear fusion market. This project will enable this b

A framework for a series of interconnected projects aimed at design, engineering, testing, and deployment efforts to address critical challenges in fusion systems, components, and

The successful provider will be responsible for the design, development, and delivery of a comprehensive Innovation Capability Development Programme

This requirement is for pressure testing of rotary friction welded joints to the cryopanels provided by Kuka. Pressure testing is required to verify the rotary friction welded join

As a part of the progress in fusion energy UKAEA needs to analyse fuel, waste or storage gases. We are aware that the market in analytical instruments and development of techniques

We are using the OEM to move furnaces between buildings. They understand the equipment well, negates/ reduces the risk of failures (short or long term). In addition, the recommissi

RAICo has access to a Mast Mounted Manipulator (MMM) system which is a Nuclear Decommissioning Authority (NDA) owned asset, that has been designed and manufactured to support nucle

Characterisation of a DT Neutron Generator in the NPL low scatter area

The UK Atomic Energy Authority has a requirement for the supply of PLC Components for its MAST-U Fusion Experiments Machine Control System.